Cell Culture Flasks
Chemglass Life Sciences Impeller Assembly Only, for 1L & 3L Adjustable Hanging Bar Spinner Flasks
Impeller Assembly Only, for 100-500mL Adjustable Hanging Bar Spinner Flasks.
Chemglass Life Sciences BioProcess Spinner Flask, 250mL, Dimpled Bottom, Internal Impeller, Complete
MicroCarrier spinner flasks promote optimal growth of suspension and microcarrier cultures.Indented bottom (100mL thru 1000mL) prevents accumulation of microcarrier beads under the impeller paddle.The 3L version does not have a dimple.The complete system includes a flask with two angled sidearms and a PTFE paddle assembly that attaches underneath the cap decreasing the risk of contamination.
Chemglass Life Sciences BioProcess Spinner Flask, 3, 000mL, Internal Impeller, Complete
MicroCarrier spinner flasks promote optimal growth of suspension and microcarrier cultures.Indented bottom (100mL thru 1000mL) prevents accumulation of microcarrier beads under the impeller paddle.The 3L version does not have a dimple.The complete system includes a flask with two angled sidearms and a PTFE paddle assembly that attaches underneath the cap decreasing the risk of contamination.
Biopioneer T75 CELL CULTURE FLASK, 100/CS
CellMAX T75 Cell Culture Flask, 5/pk, 100/cslimit 10 cases per order
Sigma Aldrich Fine Chemicals Biosciences TPPR tissue culture flasks
The inside surface treatment by TPP provides an optimal growth surface on the flask base for the most varied matrix-dependent tissue cultures. The untreated side and top inside surfaces reduce the amount of cell loss during the separation phases because undesired tissue adhesion outside the growth zone is diminished. The flasks innovative shape is of such a design that devices inserted through the flasks neck have optimal access to the entire base surface. This means that there are no dead corners that cannot be reached with pipettes or cell scrapers.This excellent accessibility is due to the large neck opening and the favorable angle of inclination. The angled neck also reduces the chance of accidental spills and permits dribble-free pouring.When the vented screw cap is tightened to the end position the closed tissue culture flask is liquid and gas tight. By simply unscrewing the cap one quarter of a turn the flask is in the VENT position with the inside of the flask being aerated
NEST SCIENTIFIC USA 96 Well Cell Culture Plate, V-bottom, TC, sterile 100/cs
Nest Scientific cell culture plates are molded from crystal clear USP grade VI virgin polystyrene. This part number comes indovidually wrapped in Tyvek/plastic blister packages. Plates are plasma etched (TC treated) to support adherent cell lines. Molded in an ISO 7 cleanroom, sterile (SAL 1 X 10^-6) and lot tested free of DNase, RNAase, DNA, cytoxins/endotoxins and BSE/TSE. cGMP compliant (21 CFR part 820/821). Extensive validation dossier available upon request.
Bellco Glass, Inc. Vent Filter，0.22 μm，62 mm diameter, Individually Wrapped, Sterile, 1/pk, 5/cs
Vent Filter，0.22 μm，62 mm diameter, Individually Wrapped, Sterile, 1/pk, 5/cs
Chemglass Life Sciences BioProcess Spinner Flask, 1, 000mL, Dimpled Bottom, Complete
Microcarrier spinner flasks promote optimal growth of suspension and microcarrier cultures.Indented bottoms, 100mL thru 1000mL, prevent accumulation of microcarrier beads under the impeller paddle.Please Note: The 6L and 8L Versions Do Not Have Dimpled Bottoms.The complete system includes a flask with two angled sidearms and a PTFE paddle with glass shaft that adjusts trough the compression fitting in the cap.
Chemglass Life Sciences Internal Stirring Assembly for 1, 000mL BioProcess Spinner Flasks
Internal Stirring Assembly for 100mL BioProcess Spinner.Flasks
Sarstedt Inc Cell culture flask, T-25, surface: Suspension, 2-position screw cap, 300/case
Tissue culture flask T-25 has a canted neck and 2-position screw cap.
Bellco Glass, Inc. Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. Size: 100ml Sidearm cap: 32mm ( includ
Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. Size: 100ml Sidearm cap: 32mm ( includ
Chemglass Life Sciences Spinner Flask, 1000mL, Jacketed, BioProcess, Plain Bottom, Complete
Water jacketed, flat bottomed spinner flasks consist of a water jacketed spinner flask, manufactured from Type 1 Class A borosilicate glass.Flasks are typically used with a circulating water bath.Jacket volumes are approximate and flasks are not graduated.Note: Paddle and Cap assembly are not included.
Chemglass Life Sciences Spinner Flask, 6000mL, Jacketed, BioProcess, Plain Bottom, Complete
Water jacketed, flat bottomed spinner flasks consist of a water jacketed spinner flask, manufactured from Type 1 Class A borosilicate glass.Flasks are typically used with a circulating water bath.Jacket volumes are approximate and flasks are not graduated.Note: Paddle and Cap assembly are not included.
Chemglass Life Sciences 250mL Large Impeller Internal Stirring Assembly Only
100mL Large Impeller Internal Stirring Assembly Only